Single Sponsored Spectroscopy Application Note Alert Having trouble viewing this email? Click here Determination of Toxic and Eco-Toxic Elements in Sewage Sludge A straight-forward, robust flame AAS method for routine analysis of cadmium, lead, nickel, copper, zinc and chromium in sewage sludge for industrial QC labs Speed Up Your Work – High-Throughput Analysis of Drinking Water with ICP-MS Using Analytik Jena’s patented iCRC technology for interference removal, we demonstrate the measurement of 82 drinking water samples per h with 21 elements. Ultra-trace Determination of Mercury in Environmental Waters Using the PlasmaQuant® MS The determination of mercury concentrations in environmental samples such as natural waters and waste waters is important in environmental risk assessment. Specification Analysis of Gasoline by HR ICP-OES The PlasmaQuant® PQ 9000 Elite (ICP-OES) represents a feasible alternative to ICP-MS instrumentation for the analysis of VOC. Determination of Trace Nitrogen Contents in Different Types of Fuels and Fuel Blends According to ASTM D4629 resp. DIN 51444 Catalyst-free high-temperature combustion with HiPerSens® detection, the compEAct N allows the detection of nitrogen at concentrations ranging from 15 µg/l– 10,000 mg/l TOC Determination in Brine Samples Coming from Desalting Process of Crude Oil Analysis of brine for TOC content a challenge. To overcome these difficulties the common technique and method have been improved with the multi N/C® 3100 TOC analyzer. Analysis of TOC and TN in Product Quality Monitoring of Hydrogen Peroxide The TOC concentration in H2O2 samples can vary in a wide range from approx. 1–500 mg/L depending on the manner of product stabilization and grade of cleanup. Determination of Major Elements in Building Materials Using Flame AAS Method for determining the composition of mullite and fiber cement as conducted by an on-site wet-chemical process lab of a producer for building materials.