DPR

Fig. 01 The initial crown prep.

Fig. 02 A digital scan was captured with the 3M True Definition Scanner.

Fig. 03 The scan and margins were reviewed and approved on the monitor.

Fig. 04 The prescription was submitted to the laboratory through the 3M Connection Center.

Fig. 05 Software was used to mark the margins of the crown.

Fig. 06 Full contour design is created.

Fig. 07 Crown is milled from a Lava Plus zirconia block.

Fig. 08 The Lava Plus zirconia disc available from 3M provides another option for labs.

Fig. 09 The milled Lava Plus crown in its green state.

Fig. 10 The crown was immersed in dying liquid.

Fig. 11 The crown is placed in a sintering tray and fired.

Fig. 12 A final shade comparison was done after staining and firing.

Fig. 13 The final crown on the model.