DLP

Fig. 01 The case model on the inEos X5 scanner's robotic arm

Fig. 02 Individual dies are scanned for additional accuracy

Fig. 03 Mark the margins

Fig. 04 Each restoration area is outlined to be copied on the biocopy model

Fig. 05 The design is stitched to the working model

Fig. 06 The reduction of the bridge with the transparent biocopy model

Fig. 07 Adjustment of the connectors

Fig. 08 The framework after milling

Fig. 09 Dip the framework into coloring solution

Fig. 10 The sintered bridge with support bars cut off and ready to stack porcelain

Fig. 11 The sintered bridge with support bars cut off

Fig. 12 The finished 7-unit lower anterior bridge

Fig. 13  Final restoration in patient's mouth