DPR

Fig. 01 Select the suitable mold design and shade.

Fig. 02 Select the suitable mold design and shade.

Fig. 03 The esthetic anatomy of the Visio.Lign veneers helps the technician to achieve a quick high standard result of a set-up try-in.

Fig. 04 Wax the palatinal area of the veneers with tooth-colored wax, beauty set-up wax.

Fig. 05 Complete esthetic set-up.

Fig. 06 Patient set-up and try-in.

Fig. 07 A silicone key is used to fix the set-up. The veneers are removed from the set-up to check the space available for the secondary structure facilitating the framework design considerably.

Fig. 08 After metal try-in, sandblast the metal framework using Al203 (Aluminum Oxide) 110-125 microns at 2.5 to 3.5 bars (40 to 50 psi) and apply the Silano-Pen or MKZ metal primer to condition the metal surface.

Fig. 09 Apply Combo.Lign opaquer material until the metal is completely covered and polymerize.

Fig. 10 Sandblast the inside of the Novo.Lign veneers and apply Visio.Link for superior bonding.

Fig. 11 Apply Combo.Lign to the veneers, a light-curing luting composite to achieve maximum adhesion to the metal or zirconia framework.

Fig. 12 Flow Crea.Lign in the interproximal and the palatal areas with the corresponding dentine shade.

Fig. 13 Individual design of the red-white area to reproduce the gum colors; Crea.Lign offers four gum shades: light, pink, rosa or lila.

Fig. 14 Visio.Lign case in-situ.