DPR

Fig. 01 Select impression tray and verify the tray does not interfere with the occlusion.

Fig. 02 Apply tray adhesive to all areas which will come into contact with impression material.

Fig. 03 Load two cartridge dispensers, one with Virtual XD wash material and one with Virtual XD tray material.

Fig. 04 Bleed cartridge to verify an even flow of base and catalyst prior to applying mixing tip.

Fig. 05 Load impression tray with tray material.

Fig. 06 Syringe wash material around preparation.

Fig. 07 Seat tray into position.

Fig. 08 Hold tray in place for minimum set time. (21/2 minutes for Fast Set and 41/2 minutes for Regular Set.)

Fig. 09 Check material to verify set and remove tray. Rinse, dry and disinfect the final impression.